We know your phone from the inside
Scroll down and see the parts of the phone up close, one at a time.
The display
The glass, the touch layer and the panel are one piece, and most repairs start by opening the phone from the front. We take it off with controlled heat and patience so its frame stays intact and seals properly again.
The battery
The battery sits in a metal tray held by screws, so replacing it is cleaner than before. If the phone drains quickly or shuts down suddenly, it's usually time for a new one.
Cameras and Face ID
The main camera has a variable aperture with tiny moving blades, and each camera is replaced as a complete unit. Blurry photos, or Face ID that stops working, can come from the lens or the module itself.
Ear speaker and loudspeaker
The ear speaker at the top is for calls, the loudspeaker at the bottom for music and alerts. Quiet or crackly sound is usually dust or a worn speaker.
Charging port and charging chip
The USB-C port connects through a long flex cable that runs up the side of the phone to the logic board. If the phone won't charge, we check the port and its cable first, then the charging chip.
The logic board
The phone's brain: two boards stacked together, with the processor on the outside against the cooling system and the storage between the layers. Faults here need careful diagnosis before any repair decision.
Frame and back glass
The frame holds every part, and the back glass protects the phone and carries the wireless charging coil. If the back glass cracks, it can be replaced on its own.
And every part goes back in place
After the repair we put the phone back together and test it before it comes back to you. Scroll up to see the parts again.